Also, keep track of all your screws and expansion slot bracket covers, as these can easily go missing and are essential to putting your PC back together. One option is to film yourself doing it so you can reference the video later. It is important when you take your PC apart that you remember how you did it so that you can put it back together again. Put all the components onto a surface that is not conductive, like a wooden table. For example, if you try to open the power supply to clean it, it could cause a severe electric shock. As a rule of thumb, if you don’t know how to remove it and put it back in again, then don’t. Some components can’t be safely removed and cleaned without jeopardising your warranty. This includes the top and bottom dust filter, cooling fans, motherboard, hard drives, etc. Take it apart – Remove the system unit panels.Follow steps 1 – 4 from the five simple steps to clean your PC.Here is a more thorough step-by-step way to clean your PC. Maybe you never have, or maybe your computer is overheating, and this is your last attempt to save it. Maybe it’s been a few years since you’ve cleaned it. Put the panels back on, and your PC is good to go. Remove the dust from the filter, vents, fans, and wiring. Using a microfiber cloth and compressed air, clean the inside of the system unit. Clean Inside – Remove the system unit panels.But make sure you don’t forget where the keys go. Removing each key will make the cleaning process easier if you can.
For bodily oils, grease and food build-up, use a swab and isopropyl alcohol to break it down. You can also use a vacuum to try and suck them out of the keyboard. If they still don’t budge, try blasting the keyboard from different angles to get them out. For the bits that refuse to come out, use compressed air and blast them out. Turn it over and dislodge everything stuck inside by shaking it. Keyboard – You want to clean out all the dust, hairs, oils and crumbs that have gotten into the grooves between your keys.Don’t use any wet sprays or household cleaning products as these can harm your PC’s casing and cause water damage.
If you don’t have one, you can touch the metal casing or the PSU housing before touching any components. To keep your PC safe from static damage, wear an anti-static wristband. Also, wear a mask if you want to protect yourself from inhaling dust. Be safe – Turn everything off and unplug it from the wall.Here are five simple steps to clean your PC. You don’t want to clean it with products that could cause water damage or get lint stuck inside your PC. Cleaning your PC correctly is very important.
0 kommentar(er)
